I use Heat n Bond Lite to trace the eagle and the stars. This is optional, but it holds the edges so they don't
fray. Don't use too much heat or you will get crispy fried wool, which I have done. The eagle needs his head
reversed if you trace it on the paper side of the HnB. (You can use a Sharpie pen and trace on the fusible side,
then re-trace to the front for cutting, thus reversing the image). Leave the paper on the back of the cut out
eagle, remove paper from the back of the stars and fuse the stars in place. Now remove the paper from the
eagle and, using matching gold thread, stitch the stars to the eagle. Embroider U-S-A on the stars in black floss.
Do this free hand, or see the directions below for transferring the lettering. Center the eagle on an 11" x 13"
piece of black wool. Use your printed pattern to adjust the placement. Fuse and stitch down in red thread. I just
use a little whip stitch.
To transfer the embroidery design you will need: a Sharpie permanent marker, a chalk pencil, and tulle, or
netting, -not the really fine stuff.
Cut an 8" square of tulle. Lay it on the pattern, and with the Sharpie, trace the lettering and the embroidery
design.
netting, -not the really fine stuff.
Cut an 8" square of tulle. Lay it on the pattern, and with the Sharpie, trace the lettering and the embroidery
design.
Lay the tulle on the black wool and position the embroidery in place. Trace over the tulle pattern with a
chalk marker to transfer the design and lettering onto the wool. The chalk brushes off easily, so transfer a
little at a time, embroider over the chalk design, then chalk on more of the pattern. etc.
chalk marker to transfer the design and lettering onto the wool. The chalk brushes off easily, so transfer a
little at a time, embroider over the chalk design, then chalk on more of the pattern. etc.
The chalk doesn't show up too well in the photo, but you get the idea. Don't worry about getting the
embroidery or lettering too exact. This is folk art, just have fun with it!
I decided to add fringe to mine. First I sewed a backing fabric on it, and turned the pillow inside out. Leave
an opening and stuff it, then stitch it closed. I then hand stitched the fringe around the outside. I have
been thinking of other ways I could finish the edge, possibly making wool fringe, or just sew a colored
binding on as you would a quilt. Finish yours however you would like!
PATCHALOT PATTERNS © 2007
embroidery or lettering too exact. This is folk art, just have fun with it!
I decided to add fringe to mine. First I sewed a backing fabric on it, and turned the pillow inside out. Leave
an opening and stuff it, then stitch it closed. I then hand stitched the fringe around the outside. I have
been thinking of other ways I could finish the edge, possibly making wool fringe, or just sew a colored
binding on as you would a quilt. Finish yours however you would like!
PATCHALOT PATTERNS © 2007
 | |  | |  | |  | |  | |  | |  |
INSTRUCTIONS FOR SWEET LAND OF LIBERTY WOOL PILLOW I adapted this eagle from an antique quilt, and am very pleased with the way it translated into wool. It is easy to complete with a few simple instructions, which I have included below. |
| | | | | | | | | | | | |